8MTLF250XY - Open Frame XY Linear Stages

产品详情
产品参数

Specifications

Model 8MTLF250XY-2L-2U-4LEn1 8MTLF250XY-1L-2U-3LEn1 8MTLF250XY-2L-1U-3LEn1 8MTLF250XY-1L-1U-2LEn1
Kinematics & Feedback information
 Travel Range, mm 250 x 250
 Encoder Type Optical
 Encoder Model LEN1
 Encoder Resolution Any of the range: 25 nm to 5 µm (on demand)
 Encoder Interface Differential RS422
 Internal Multiplier YES
 Multiplication factor 1) 4-200 (on demand)
 Encoder Grating Period, µm 20
 Reference Mark (Index) Yes
 Absolute Accuracy 2)
  Before Calibration, µm ±5 ±6
  After Calibration, µm ±1.5 ±2
 Uni-Directional Repeatability, µm N/A
 Bi-Directional Repeatability (peak to peak) 2), µm ±0.25 ±0.5
 Bi-Directional Repeatability (RMS) 2), µm ±0.15 ±0.30
 Pitch 3), µrad / arcsec ±30 / ±6.20
 Yaw 3), µrad / arcsec ±30 / ±6.20
 Roll, µrad / arcsec N/A
 Maximum Velocity (with load 4kg) 4), mm/s <1500
 Maximum Acceleration (with load 4kg) 5), mm/s2 <20000
 Limits Switches Type (Safety) Hall Sensors
 Limit Switch Polarity (Safety) Pushed is closed
 Limit Switch Voltage, V 5…24
Load, Guiding & Transmission Information
 Design Type Real Gantry (MIMO) Planar-Gantry Hybrid Planar
 Linear Motor Model LM5
 Linear Motor Design Type Ironless BLDC motor
 Maximum Bus Voltage, VDC >300
 Quantity of Motors 4 3 2
 Load Capacity (Centrally Placed) 6)
  Horizontal, kg 30
  Vertical, kg N/A
 Moving Mass 7), kg
  X (bottom), kg 39.1 37.8 34.4 33.9
  Y (upper), kg 7.5 7.1 7.5 7.1
 Guiding System Recirculating linear rails and 
carriages units with caged balls
Material & Environment Conditions
 Housing Material Aluminum Alloy
 Housing Coating (Finish) Black Anodizing
 Environment Pressure Normal Atmosphere
 Operating Temperature, °C 20±2
Control, Communication and Cabling
 Recommended Controllers 8) ACS Products Line or 8SMC5-USB series
 Recommended Drivers 8) ACS Products Line or 8SMC5-USB series
 Recommended Power Supply 9) 2 phase / 3 phase source
 Recommended Communication Interface 12) EtherCAT / RS232 / USB / TCP-IP
 Cable Length, m 2 (other by request)
 Differential Outputs 10) On request
Accessories Information
 Base Plate for Mechanical Interface Granite is recomended
 Z Configuration Not available 
(choose from other Standa stages series)
Additional Details
 Dimensions of Moving Platform (W x L), mm 430 x 430
 Overall Linear Stage Dimensions (W x L x H), mm 746 x 746 x 106
 Measurement System Metric/Imperial
 Orthogonality11), µrad / arcsec 24 / 5
 Protection Level Request Standa support
 RoHS Compliant
 Weight, kg ~68